Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
   
               
 
 
The Montana Finishes product line offers an extensive selection of coatings that feature the high-tech, user-friendly performance and competitive value desired by today's professional refinishers.
A standard of utmost quality is designed into each formula as well as the manufacturing process of each product. Based on the many years of repeat business with satisfied customers, the Big Sky® Automotive Finishes brand has a history of uncompromised quality and proven product performance.
 
 
 
     
   
 
 
     
MONTANA® SPECIALTY PRODUCTS
Montana Big Sky® Automotive Refinishing Product Line includes an extensive selection of Specialty Additives, Aerosols, and Sealers. These products give you proven consistent quality, ease of use and first-rate performance at a fraction of the price.
 
 
   
Basecoat Balancer BDRD01™ :
BDRD01™ Basecoat Balancer Replacement is a high-quality component at an economical cost. This replacement product compares to DuPont™ Chromabase® Balancer.
MSDS # 5    
 
   
Basecoat Binder BDRD02™ :
BDRD02™ Basecoat Binder Replacement is a high-quality component at an economical cost. This replacement product compares to DuPont™ Chromabase® Binder.
MSDS # 5    
 
   
Super Accelerator CR22ACC™ :
CR22ACC™ Super Accelerator is designed to provide faster cure and dust free times of two component urethane coatings in colder weather.
MSDS # 8    
 
   
Chassis / Frame Black Economy Coating FE40™ Chassis Black :
FE40™ Chassis Black is an economical protective coating for chassis, engine compartment and miscellaneous parts refinishing. It has excellent adhesion and impact resistance. FE40™ is resistant to fuels when thoroughly cured using MP2000™ Catalyst.
Tech Sheet # 2000 MSDS # 35
 
   
Super Accelerator PE35ACC™ :
PE35ACC™ Super Accelerator is designed to produce faster cure and dust-free times of two component urethane coatings in colder weather. It, also, extends the pot life of high solids coatings.
MSDS # 8    
 
   
Fisheye Eliminator CR22FEE™ :
CR22FEE™ Fisheye Eliminator helps to reduce fisheye problems caused by improper cleaning.
MSDS # 8    
 
   
Performance Plus™ Adhesion Promoter MP1222™ Bondcoat :
MP1222™ Bondcoat is designed to promote adhesion of basecoat color to OEM baked enamel finishes when doing spot and panel repair paint jobs.
MSDS # 8    
 
   
Wet-Look Acrylic Enamel Catalyst MP1050™ :
MP1050™ Wet-Look is specially formulated as a quality product at an economical price. It causes chemical changes in acrylic enamel, producing a harder, more durable high-gloss finish.
MSDS # 6    
 
   
Performance Plus™ Wet-Look Acrylic Enamel
Catalyst MP1001™ :
MP1001™ Premium Wet-Look is a high quality multi-urethane solids blend specially formulated as a premium wet-look product for the industry. When MP1001™ is mixed with acrylic enamel it causes chemical changes producing a harder, more durable high-gloss finish.
MSDS # 7    
 
   
Performance Plus™ Specialty Low VOC
MP1393™ Specialty Polyurethane Activator is designed to produce a high gloss, durable finish where VOC emissions are at 3.5 VOC restrictions.
MSDS # 7    
 
   
Performance Plus™ Specialty Low VOC Acrylic
Enamel Activator MP1395™ :
MP1395™ Specialty Acrylic Enamel Catalyst is designed to produce a high gloss, durable finish where VOC emissions are at 3.5 VOC restrictions.
MSDS # 7    
 
   
Performance Plus™ Specialty Polyurethane
Activator MPV1300™ :
MPV1300™ is a premium specialty activator used in 5.0 VOC polyurethane paint systems to create a high luster and very hard, durable finish.
MSDS # 7    
 
   
Synthetic Enamel Catalyst MP2000™ :
MP2000™ is a urethane catalyst for all straight (synthetic) enamels. It speeds drying time while producing a higher gloss, more corrosive-resistant, and harder enamel finish.
MSDS # 6    
 
   
Rubberized Undercoating (Standard) SA210™ :
SA210™ is a rubberized asphaltic coating, which contains no asbestos fiber. It is an effective coating that provides a flexible, textured finish. SA210™ is durable and helps retard the effects of rust, corrosion, moisture, fumes, dust, heat and cold. SA210™ is not paintable.
MSDS # 11    
 
   
Pro-Rubberized Undercoating (Paintable) SA220™ :
SA220™ is a tough, flexible, rubber coating that is paintable. This undercoating provides rust protection, resists abrasion, and helps eliminate noise.
MSDS # 11    
 
   
Flexible Bumper Coating SA680™ :
SA680™ Bumper Coating is a premium quality flexible coating that is specially formulated for excellent bonding to rubber, urethane, and metal. It does not require blending or added preparation with special flex agents. SA680™ offers a maximum adhesion even under dramatic changes in temperature. It is easy to use and does not require a primer.

MSDS # 11

   
 
   
Seam & Joint Sealer (Black) SA560™ Form-A-Seal™ :
SA560™ is a heavy-bodied tollable mastics for sealing any type of interior or exterior seam or joint. Form-A-Seal™ is fast setting, firm and skins in about 5 to 7 minutes allowing ease of tooling. SA560™ accepts all types of paint with excellent paint holdout. Will not crack or peel and remains flexible.

MSDS # 10

   
 
   
1K Aerosol Metal Etch Primer (Gray) SA5620™:
SA5620™ Aerosol 1K Metal Etch Primer (Gray) is a pre-treatment metal etch primer that provides a fast drying barrier coat to maximize the adhesion properties to properly prepared steel, aluminum, and galvanized metal. Use to prime small areas or sand throughs prior to topcoating. Compatible with all of todays automotive and fleet finishes.

Tech Sheet # 1070

MSDS # 11
 
   
Edge Blender TH01000™ :
TH01000™ Edge Blender is a ready-to-spray blending agent designed to melt-in the blend edge of Montana branded clears and single stage colors. TH01000™ Edge Blender helps to hide the blend edge where a full panel refinish can not be performed.

Tech Sheet # 2016

MSDS # 8
 
   
Surface Prep Cleaners TH5950™ Strong Wax &
Grease Remover :
This strong surface cleaner is designed specifically for removing tar, wax, oil, grease, road grime, silicone, and surface contaminants prior to sanding or bodywork.

Tech Sheet # 2013

MSDS # 1
 
   
Surface Prep Cleaners TH5951™ Mild Wax & Grease Remover :
This mild surface cleaner is designed specifically for use after priming and sanding. TH5951™ may also be used as a general-purpose tar and bug remover.

Tech Sheet # 2013

MSDS # 1
 
   
Surface Prep Cleaners TH5952™ Fast Evaporating
Surface Cleaner :
This extremely fast evaporating surface cleaner safely and quickly removes oils, waxes, and silicone prior to applying the colorcoat. TH5952™ is perfect for use around moldings and minor clean up prior to painting.

Tech Sheet # 2013

MSDS # 1
 
   
Surface Prep Cleaners TH5953™ Hydro-Klean™
Zero VOC Surface Cleaner:
This ready to use, zero VOC water-based surface cleaner is designed specifically for areas with low VOC regulations. Hydro-Klean™ is medium drying and is designed to remove tar, wax, oil, grease, road grime, silicone, and surface contaminates prior to sanding or bodywork as well as precleaning before applying topcoats.

Tech Sheet # 2013

MSDS # 34
 
   
Flexible Parts Cleaner AP100™:
AP100™ and AP200™ are designed to aid with the adhesion of primer or topcoats over difficult bare plastics. When used as a system, these products aid with the appearance and durability on substrates such as fiberglass, (PP) Polypropylene, TPO and others. DO NOT use on polycarbonate (Lexan®).

Tech Sheet # 1020

MSDS # 8
 
   
Plastic Adhesion Promoter AP200™:
AP100™ and AP200™ are designed to aid with the adhesion of primer or topcoats over difficult bare plastics. When used as a system, these products aid with the appearance and durability on substrates such as fiberglass, (PP) Polypropylene, TPO and others. DO NOT use on polycarbonate (Lexan®).

Tech Sheet # 1020

MSDS # 8
 
   
Liquid Spray Mask AP300™ Blue Shield™ :
AP300™ Blue Shield™ Liquid Spray Mask is designed to replace plastic sheeting or car covers and provides start-to-finish protection. This water based ready-to-spray liquid mask is fast, easy to apply and dries to a tack-free film that can be taped and re-taped during border masking with paper. AP300™ can be baked multiple times at temperatures up to 170ºF. One even coat protects any part of the vehicle including grills, wheel wells, engine compartments, and vinyl tops.

Tech Sheet # 1020

MSDS # 28
 
DISCLAIMER:PPG®, Deltron®, Delfleet®, Delta®, Concept®, Delstar®, and Ditzco® are registered trademarks of PPG Industries. PPG Industries does not manufacture our products. DuPont® AND™, Imron®, Centari®, and Dulux® are registered trademarks of E.I. Pont de Nemours and Company. DuPont® does not manufacture our products.